2003-2009 Dodge 5.9/6.7L – EMF Ball Joints – Set of 4 (Upper and Lower) Oversized

Code: EMF-DBJ-03-OS

EMF Ball Joint Warranty

  • Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category.  The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.
  • Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.

CAD$790.00

In Stock
Share (0)
Total: 0 Total: 0 Total: 0

Description

OD machined 10 thou larger than factory to accommodate worn out or larger knuckle holes caused by frequent changing of prior ball joints or the previous use of Knurled Ball Joint Housings that stretched the housing hole.

What if you could replace your ball joints once and never have to press the ball joint out of the knuckle ever again?

If you’re looking for something LONG LASTING, REBUILDABLE and GREASEABLE, you have come to the right place.

What is Included in the EMF Ball Joint Kit?

  • 1 Pair of Oversized Upper Ball Joints
  • 1 Pair of Oversized Lower Ball Joints
  • Install Nuts
  • Install Washer & Cup (To avoid damaging the cap and the ring when pressing the ball joint into the knuckle)
  • Allen Key & Spanner Wrench (To Tighten the Ball Joints or Rebuild them in the future)
  • 1 Pair of Dodge Intermediate Shaft Bushings (To remove any wander felt in the steering column – Mandatory to install for all Ball Joint Sets)
  • Instructions & an EMF Sticker

 

HOUSING MEASUREMENTS:

STOCK FACTORY UPPER BALL JOINT SIZE – 1.8975”

EMF UPPER BALL JOINT REGULAR BODY SIZE – 1.9” (+.001)

EMF OVERSIZED UPPER BALL JOINT SIZE – 1.905″ (+.001)

 

STOCK FACTORY LOWER BALL JOINT SIZE – 1.8095”

EMF LOWER BALL JOINT REGULAR BODY SIZE – 1.8115” (+.001)

EMF OVERSIZED LOWER BALL JOINT SIZE – 1.8185″ (+.001)

 

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Model Specific

This part fits select models

MakeModelYear
MakeModelYear
DodgeCummins 5.92003
DodgeCummins 5.92004
DodgeCummins 5.92005
DodgeCummins 5.92006
DodgeCummins 5.92007
DodgeCummins 6.72007
DodgeCummins 6.72008
DodgeCummins 6.72009

Related products

  • Dodge

    Mag-Hytec MAG12-10.25 Rear Differential Cover

    (0 reviews)
    CAD$357.00 Add to cart
  • Dodge

    BD Diesel 1032050 – Sway Bar End Link Kit – 2000-2009 Cummins 6.7L

    (0 reviews)
    CAD$251.95 Add to cart
  • Drivetrain and Chassis

    2013.5-2019 Dodge 6.7L – EMF Ball Joints – Set of 4 (Upper and Lower)

    EMF Ball Joint Warranty

    • Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category.  The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.
    • Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.
    (0 reviews)
    CAD$859.00 Add to cart
  • Chassis & Steering

    2000-2002 Dodge 5.9L – EMF Ball Joints – Set of 4 (Upper and Lower)

    EMF Ball Joint Warranty

    • Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category.  The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.
    • Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.
    (0 reviews)
    CAD$790.00 Add to cart