2013.5-2019 Dodge 6.7L – EMF Ball Joints – Set of 4 (Upper and Lower)

Code: EMF-DBJ-13

EMF Ball Joint Warranty

  • Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category.  The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.
  • Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.

CAD$859.00

In Stock
Share (0)
Total: 0 Total: 0 Total: 0

Description

What if you could replace your ball joints once and never have to press the ball joint out of the knuckle ever again?

If you’re looking for something LONG LASTING, REBUILDABLE and GREASEABLE, you have come to the right place.

What is Included in the EMF Ball Joint Kit?

  • 1 Pair of Upper Ball Joints
  • 1 Pair of Lower Ball Joints
  • Install Nuts
  • Install Washer & Cup (To avoid damaging the cap and the ring when pressing the ball joint into the knuckle)
  • Allen Key & Spanner Wrench (To Tighten the Ball Joints or Rebuild them in the future)
  • 1 Pair of Dodge Intermediate Shaft Bushings (To remove any wander felt in the steering column – Mandatory to install for all Ball Joint Sets)
  • 1 90 degree Grease Fitting Coupler so you can grease your ball joints on the truck without having to take the tires off.
  • Instructions & an EMF Sticker

 

HOUSING MEASUREMENTS:

STOCK FACTORY UPPER BALL JOINT SIZE – 1.8975”

EMF UPPER BALL JOINT REGULAR BODY SIZE – 1.9” (+.001)

STOCK FACTORY LOWER BALL JOINT SIZE –  1.975″

MOPAR REPLACEMENT LOWER BALL JOINT SIZE – 1.977″

EMF LOWER BALL JOINT REGULAR BODY SIZE – 1.977″ (+.001)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Model Specific

This part fits select models

MakeModelYear
MakeModelYear
DodgeCummins 6.72013
DodgeCummins 6.72014
DodgeCummins 6.72015
DodgeCummins 6.72016
DodgeCummins 6.72017
DodgeCummins 6.72018
DodgeCummins 6.72019

Related products

  • Chassis & Steering

    2003-2009 Dodge 5.9/6.7L – EMF Ball Joints – Set of 4 (Upper and Lower) Oversized

    EMF Ball Joint Warranty

    • Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category.  The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.
    • Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.
    (0 reviews)
    CAD$790.00 Add to cart
  • Chassis & Steering

    2000-2002 Dodge 5.9L – EMF Ball Joints – Set of 4 (Upper and Lower) Oversized

    EMF Ball Joint Warranty

    • Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category.  The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.
    • Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.
    (0 reviews)
    CAD$790.00 Add to cart
  • Pacbrake HP10121 Air Suspension Kit for 2007.5-2009 Cummins 6.7L
    • Pacbrake HP10121 Air Suspension Kit for 2007.5-2009 Cummins 6.7L
    Dodge

    Pacbrake HP10121 Air Suspension Kit – 2007.5-2009 Cummins 6.7L

    (0 reviews)
    CAD$587.15 Add to cart
  • Pacbrake 2003-2018 Cummins 4WD HD Rear Air Suspension Kit (HP10002)
    • Pacbrake 2003-2018 Cummins 4WD HD Rear Air Suspension Kit (HP10002)
    Dodge

    Pacbrake HP10002 Air Suspension Kit – 2003-2020 Cummins 5.9L/6.7L

    (0 reviews)
    CAD$514.21 Add to cart